 |
 |
Page 2 of 3 |
|
EPO Tuff ES-83 Anti-Slip Two Part Epoxy
ES-83 is a high 83% solids, high build, slip resistant epoxy protective coating for tough industrial, marine and off shore environments. This product is designed to solve complex slip injury problems with minimal surface preparation.
ES-83 bonds to tightly adhering rust and intact old paint, new and unpainted surfaces without blast cleaning with excellent resistance to weather, moisture, sunlight and chemical fumes.
Touch dry in as few as two hours at 21c with recoat in three hours, and low temperature application and cure down to 4c. Can be over-coated with a wide range of products including AU-73 to provide a superior system.
Available in a wide range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete, wood, glass etc ES-83 has excellent U.V. chemical and environmental resistance. Low VOC. Excellent levelling properties.
Coverage is approximately 24.5 square metres per US gallon at 125 microns and can be applied at up to 200 microns. Available in 1 US gallon packs.
A two part epoxy coating formulated to provides a tough protective coating against chemical penetration including brake fluid, Skydrol, petrol, solvents etc making it ideal for automotive service bays and aviation applications.
Aqua Tuff penetrates damp, dry and green concrete sealing impossible greases and is ideal as a primmer prior to application of 100% solid epoxy coatings.
Recoat in three to four hours. Available in a range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete AQUA TUFF has excellent U.V. chemical and environmental resistance. Excellent levelling properties.
Coverage is approximately 20.5 square metres per US gallon. Available in 1 and 5 US gallon packs.
|
|
|
|
